HSM Status

Command:

To return HSM status information

Notes:

Mode 00 available, all others reserved for future use

Field

Length & Type

Details

COMMAND MESSAGE

Message header

m A

(Subsequently returned to the Host unchanged).

Command code

2 A

Value NO.

Mode flag

2 H

Mode Flag:        00 - Return status information

                       01 -

                       :          Reserved for future use

                       FF -

End message delimiter

1 C

Optional. Must be present if a message trailer is present. Value X’19.

Message trailer

n A

Optional. Maximum length 32 characters.

RESPONSE MESSAGE

Message header

m A

Returned to the Host unchanged.

Response code

2 A

Value NP.

Error code

2 N

00 : No errors

13 : LMK error; report to supervisor

15 : Error in input data

Mode 00

I/O buffer size

1 N

I/O buffer size    0 - 2k

                       1 - 8k

                       2 - 16k

                       3 - 32k

Ethernet type

1 N

Type of Ethernet connection

                        0 - UDP

                        1 - TCP

Number of TCP Sockets

2 N

Number of TCP sockets configured (maximum 64)

Firmware number

9 A

The firmware reference number in the form: xxxx-xxxx

DSP fitted

1 N

DSP fitted         0 - No

                       1 - Yes

DSP firmware number

4 A

DSP firmware number

Mode 01 - FF Reserved for future use

End message delimiter

1 C

Present only if present in the command message. Value X’19.

Message trailer

n A

Present only if present in the command message. Maximum length 32 characters.